Supplier Development Engineer - Diagnostics and Sensors

Number of employees

190

Devens, MA, United States

Posted on: 2024-01-17

Category: renewables

Apply now

Please let Commonwealth Fusion Systems know you found this job on Work in Green. This will help us grow!

Employment type:

Full time

Experience required:

Intermediate

Salary

Salary not provided

About the company:

Commonwealth Fusion Systems (CFS) has the fastest, lowest cost path to commercial fusion energy. 

CFS is collaborating with MIT to leverage decades of research combined with new groundbreaking high-temperature superconducting (HTS) magnet technology. HTS magnets will enable compact fusion power plants that can be constructed faster and at lower cost. 

The mission is to deploy fusion power plants to meet global decarbonization goals as fast as possible. CFS has assembled a team of leaders in tough tech, fusion science, and manufacturing with a track record of rapid execution. Supported by the world’s leading investors, CFS is uniquely positioned to deliver limitless, clean, fusion power to combat climate change. 

If you are interested in joining our team, check out cfs.energy/careers for more information.

Commonwealth Fusion Systems (CFS) has the fastest, lowest cost path to commercial fusion energy.

CFS collaborates with MIT to leverage decades of research combined with groundbreaking new high-temperature superconducting (HTS) magnet technology. HTS magnets will enable compact fusion power plants that can be constructed faster and at lower cost. Our mission is to deploy these power plants to meet global decarbonization goals as fast as possible. To that end, CFS has assembled a team of leaders in tough tech, fusion science, and manufacturing with a track record of rapid execution. Supported by the world’s leading investors, CFS is uniquely positioned to deliver limitless, clean, fusion power to combat climate change. To implement this plan, we are looking to add dedicated people to the team who treat people well, improve our work by adding multifaceted perspectives and new ways of solving problems, have achieved outstanding results through a range of pursuits, and have skills and experience related to this role.

The Senior Supplier Development Engineer role is to partner with different business units, such as design engineering, quality and procurement, to best understand which suppliers are struggling to achieve rate, hit certain quality requirements and provide consistent product.

The SPARC diagnostic team is developing nearly 40 types of measurements that will be used in real-time control of tokamak plasmas and to inform the design of ARC.  Our measurement systems include magnetics, interferometry, neutral pressure, x-ray to visible spectroscopy, camera imaging, bolometry, neutrons, Thomson scattering, electron cyclotron emission, reflectometry, Langmuir probes and structural temperature, displacement and strain sensing.  All have completed preliminary design, CFS is looking to grow the SPARC team in order to be confident that final designs can accomplish SPARC’s mission goals and can be sourced and delivered to meet SPARC’s aggressive timeline while also meeting specifications.  While some of the Diagnostic components can be sourced from commercial, off-the-shelf product lines, many need to be customized or improved, and may include leveraging Academic or National Lab knowledge.  Areas included metallic and ceramic components fabricated to precise tolerances, custom vacuum feedthroughs for electrical and optical signals and large custom optics with specialized coatings. Near-term this role will help the diagnostic team iterate on design to ensure ‘tricky’ components can be reliably sourced, and once designs are complete, work with vendors and CFS engineers to prevent, identify, and mitigate non-conformances . 


CFS team members thrive in a fast-paced, dynamic environment and have demonstrated exceptional results through a range of different pursuits. We all tightly align with our company values of integrity, execution, impact and self-critique. As we grow, we are looking to add talented people who are mission driven and bring diverse perspectives and new ways of solving problems.

At CFS, we deeply value diversity and are an equal opportunity employer by choice. We consider all qualified applicants equally for employment. We do not discriminate on the basis of race, color, national origin, ancestry, citizenship status, protected veteran status, religion, physical or mental disability, marital status, sex, sexual orientation, gender identity or expression, age, or any other basis protected by law, ordinance, or regulation.

This team member will:

  • Physically be on-site at vendors for potentially long periods of time
  • Be a Change Agent - identifying gaps in vendor processes, articulating what needs to be done to close those gaps and holding vendors accountable with concrete timelines
  • Ability to inspect parts using different measurement tools and interpret inspection reports
  • Design, develop required process controls and quality plans
  • Facilitate the creation and execution of PFMEA processes and applicable elements of APQP
  • Support vendors’ ISO 9001:2015 implementation and compliance
  • Support creation of manufacturing instructions to specify and document quality critical characteristics
  • Develop vendors’ in-process inspection and test procedures
  • Perform and/or oversee process capability studies and Measurement Systems Analysis
  • Author contract documents with legal and commercial teams. Manage contracts ensuring performance of the supplier to contract obligations. Understand interrelationships between contracts and terms while applying creativity and sound business reasoning to interpret application of contract to business needs.
  • Establish preferred suppliers by category. Create and implement related management programs to develop, continuously improve, manage the performance of, and monitor KPIs of the supply base.
  • Lead and mentor team members.
  • Skillfully balance the price, delivery, quality, service, and value tradeoffs and rationalize the supply base
  • Adhere to all supply chain policies, procedures, guidelines and instructions including those regarding the procurement of materials, intellectual property, and export compliance.
  • Negotiate internally and externally at high levels or with persons of influence frequently.
  • The ideal candidate will have most, if not all, of these requirements:

  • Bachelor’s Degree in a Science or Engineering
  • 7+ years experience in Supply Chain, Engineering, or Manufacturing
  • Hands-on experience with sensors similar to those that may be used in plasma diagnostics (cameras, temperature, strain, radiation, spectrometers, lasers, microwaves)
  • Perform advanced technical activities such as Supplier Assessments & Audits, including Quality Management System (e.g., ISO 9001, AS 9100, IATF 16949)
  • Perform advanced technical activities such as Product manufacturing (e.g., Machining) and Special Process (e.g., Plating, Heat treat, Welding)
  • Utilize specialized quality tools such PPAP (PFMEA, Control Plan, MSA) capacity analysis and Lean Six Sigma initiatives
  • Specific knowledge regarding small machine shop manufacturing
  • Ability to design, establish and implement supplier quality improvement processes and procedures.
  • Implementation and management of ERP or other procurement tools
  • Ability to teach and educate others with little background on the subject
  • Creative negotiating skills
  • Experience with MS Office
  • Exceptional communications skills
  • Strong collaboration and relationship building skills
  • Ability to prioritize and execute tasks
  • Works with Integrity
  • Strong Customer Service skills
  • Remarkable problem-solving skills
  • Works well under pressure
  • Possesses excellent judgment
  • Additional preferred experience and/or qualifications:

  • Masters Degree
  • Six Sigma Certification (Yellow, Green or Black)
  • Experience managing multiple levels of staff (Preferred)
  • Experience in a start-up or high growth environment (preferred)
  • Experience in manufacturing environment (preferred)
  • Experience in Automotive or Aerospace, or other high-tech, regulated industry (preferred)
  • Ability to occasionally lift up to 50 lbs
  • Perform activities such as typing, standing, or sitting for extended periods of time
  • Work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, lead (Pb), high voltage, high current, pressure systems, and cryogenics
  • Willingness to travel or work required nights/weekends/on-call
  • #LI-Hybrid
  • Similar climate jobs

    These are some of our top picks for great climate jobs on Work in Green.

    View all jobs
    Charm Industrial logo
    United States
    Helion logo
    United States
    Commonwealth Fusion Systems logo
    United States
    Commonwealth Fusion Systems logo
    United States

    118 Renewables jobs at Commonwealth Fusion Systems

    Commonwealth Fusion Systems is hiring Mechanical Engineer - FEED,Equipment Engineer,Mechanical Engineer - Manufacturing, and more.

    View all jobs at Commonwealth Fusion Systems